Applied Membranes M-T1812A36-FIL RO Membrane

Membrane Model Number: M-T1812A36 Flow Rate: 36 Gal/Day (136 L/Day) Minimum Salt Rejection:* 96% Stabilized Salt Rejection:* 98% *Salt Rejection for membrane shown is from internal test data.Note: Performance specifications based on 500 ppm tap water, 50 psi (0.35 MPa) applied pressure, 77�F (25�C) feed water temperature, feed water pH 7-8 and 15% recovery. Element permeate flow may vary � 15%.RECOMMENDED OPERATION CONDITIONS Maximum operation pressure 125 psi (0.86 MPa) Maximum feed flow rate 2 gpm Maximum operating temperature 113� F (45� C) Maximum feed water turbidity 1 NTU Maximum feed water SDI (15min) 5 Chlorine tolerance 0 Feedwater pH range, Continuous Operation 2-11 Feedwater pH range, Short-Term Cleaning (30min) 1-12 Minimum brine flow to permeate flow ratio 4:1

• Chlorine tolerance: 0, Max. feed flow rate: 2gpm, Minimum salt rejection: 96%
• Stabilized salt rejection: 98%, Dimensions: 11.75" x 10" x 1.75", NSF certified for material requirements
• Max. feed water turbidity: 1 NTU, Max. feed water SDI (15 min.): 5, Max. operating temp.: 113 F (45 C)
• Max. operating pressure: 125 psi (0.86 MPa), Feedwater pH range, Continuous Operation: 2-11, Minimum brine flow to permeate flow ratio: 4:1
• Permeate flow rate: 36 gallons/day (136 liters/day), Feedwater pH range, Short-Term Cleaning (30min): 1-12